Headstock Bearings and Seals: Honda TL200 TL 200 (1976-1978) Honda XL1000 This kickstart lever is a

This kickstart lever is a like for like replacement of the original Honda CB125 with a 16mm spline

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha IT425 for the years and models shown above

Kawasaki Z / KZ 1000 E (1979-1980)

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Suzuki TS100 for the years and models shown above

Headstock Bearings and Seals: Honda TL200 TL 200 (1976-1978) Honda XL1000 This kickstart lever is aBrand new set of headstock steering bearings and seals to fit: Honda TL 200 J Y (1976 1978). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda TL200 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require